Latches

1 1/2" x 2 1/2" SS Residential Latch

KSS-15X25L

Ideal for walk gates, this all stainless steel latch relies on gravity to help keep it closed. Lockable, unhanded, simple to operate, and durable.

3" SS Residential Latch

KSS-3X3LS

3" Residential Latch. All components are made of stainless steel. The latch does not rust over time as paint is worn off by bar hitting receiver. This latch is non-handed, and can be converted easily in the field to either side of gate. For use on walk gates.

3" SS Residential Latch Includes 2 Way Lever Arm

KSS-3X3WLBS

Same as our 3" Residential Latch, with the added lever arm convenience of opening from either side of gate! All components are made of stainless steel. Does not rust over time as paint is worn off by bar hitting receiver.
This latch is non-handed, and can be converted easily in the field to either side of gate. For use on walk gates.

Small Gravity SS One Way Latch

KSS-GL-1

This latch is an old favorite. This all stainless steel latch works on virtually any gate, and has been an industry standard design for years. Non-handed, bar is mounted to gate, with catch mounted to post (set back from radius on vinyl).

Small Gravity SS Two Way Latch

KSS-GL-2

MFT's new version of an old favorite incorporates gate brackets that wrap around and secure with screws from two sides. The older designs that were secured to the face of the gate and post with just two screws fell off easier. Non-handed, bar mounts to gate, with catch mounted to outside corner of post, for greater adjustment ability.

Small SS Dual Latch

KSS-DUAL15

Often imitated, this latch is a favorite! Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits on all posts and gate frames 1 3/4" and larger. Integral gate pull built into bracket at gate side.

Large SS Lockable Economy Latch with 3/8" Bar

KSS-ECLSS38

Often imitated, this latch is a favorite! Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" for secure latching of heavy gates.
All components are stainless steel. Fits on all posts and gate frames 2" and larger. Integral gate pull built into bracket gate side. This latch has a 3/8" bar and is lockable.

Large SS Lockable Economy Latch With 1/2" Bar

KSS-ECLSS

Often imitated, this latch is a favorite! Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" for secure latching of heavy gates.
All components are stainless steel. Fits on all posts and gate frames 2" and larger. Integral gate pull built into bracket gate side. This latch has a 1/2" bar and is lockable.

SS Dual Lockable Economy Latch with 3/8" Bar

KSS-DUAL38

Similar to the Large Economy Latch, can be locked from both sides (inside or outside) of the gate. Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 5" or larger. This latch has a 3/8" bar.

SS Dual Lockable Economy Latch with 1/2" Bar

KSS-DUAL

Similar to the Large Economy Latch, can be locked from both sides (inside or outside) of the gate. Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 5" or larger. This latch has a 1/2" bar.

MS Dual Lockable Economy Latch with 1/2" Bar

KMS-DUAL-B

Similar to the Large Economy Latch, can be locked from both sides (inside or outside) of the gate. Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
Components are mild steel and stainless steel. Fits a gate frame of 2" or larger, and a post of 5" or larger. This latch has a 1/2" bar.

SS Dual Lockable Economy Latch with 1/2" Bar - Extended Tab

KSS-DUAL-ET

Similar to the Large Economy Latch, can be locked from both sides (inside or outside) of the gate. Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 5" or larger. This latch has a 1/2" bar.

SS Dual Lockable 6" Economy Latch

KSS-DUAL-6

Now made for 6" and larger posts! Similar to the Large Economy Latch, and can be locked from both sides (inside or outside) of the gate. Sometimes referred to as a “hatchet latch", it has a spring loaded “clicker" for secure latching of heavy gates. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 6" or larger.

2" MS Charleston Latch

KMS-CHARLESTONIILATCH

Design based on historical latches made before the Civil War, and still in service. Made heavy duty to last, and last.
Fits on 2" x 2" post and frame or larger, lockable. Bumpers on latch add a cushion close for a lifelong endurance of the latch.

3" MS Charleston Latch

KMS-CHARLESTONIIILATCH

Design based on historical latches made before the Civil War, and still in service. Made heavy duty to last, and last.
Fits on 2" x 2" post and frame or larger, lockable. Bumpers on latch add a cushion close for a lifelong endurance of the latch.

2" MS Gate Latch for Walk and Double Gates

KMS-2FLIP

A variation on the traditional fork latch. This mild steel latch is designed for ornamental steel and provides positive, lockable security for your ornamental installation with easy operation and good looks.

2" SS Gate Latch for Walk and Double Gates

KSS-2FLIP

A variation on the traditional fork latch. This stainless steel latch is designed for ornamental steel and provides positive, lockable security for your ornamental installation with easy operation and good looks.

2 1/2" SS Gate Latch for Walk and Double Gates

KSS-25FLIP

A variation on the traditional fork latch. This stainless steel latch is designed for ornamental steel and provides positive, lockable security for your ornamental installation with easy operation and good looks.

Embassy 1" SS Heavy Duty Slide Bolt Latch

KSS-HDEMBSL-PLAIN

Heavy Duty latch for the largest and most abused gates. Works well on dumpster enclosures and is lockable. Fits any gate big enough to need a latch this strong! Comes with carriage bolts.

Embassy MS Heavy Duty 1" Slide Bolt Latch

KMS-HDEMBSL

Heavy Duty latch for the largest and most abused gates. Works well on dumpster enclosures and is lockable. Fits any gate big enough to need a latch this strong!

Embassy 1" MS Heavy Duty Slide Bolt Latch (Galvanized)

KMS-HDEMBSLHDG

Heavy Duty latch for the largest and most abused gates. Works well on dumpster enclosures and is lockable. Fits any gate big enough to need a latch this strong! Hot Dipped Galvanized. Comes with carriage bolts.

1 1/2" SS Safety Horse Latch with 1" Catch

KSS-4X4SLS2

This all stainless steel, spring loaded latch mounts under rail. This prevents horses from injuring themselves on it, even if they rub on it. Because of the latch's "smooth pull" design, horses also cannot get a “grip" with their mouths to open the gate.
This latch is for 1 1/2" rails and comes with 1" catch. White is optional - call for details.

1 1/2" SS Safety Horse Latch with 2" Catch

KSS-4X4SLS4

This all stainless steel, spring loaded latch mounts under rail. This prevents horses from injuring themselves on it, even if they rub on it. Because of the latch's "smooth pull" design, horses also cannot get a "grip" with their mouths to open the gate.
This latch is for 1 1/2" rails and comes with 2" catch. White is optional - call for details.

1 1/2" SS Safety Horse Latch with 2 1/2" Catch

KSS-4X4SLS5

This all stainless steel, spring loaded latch mounts under rail. This prevents horses from injuring themselves on it, even if they rub on it. Because of the latch's "smooth pull" design, horses also cannot get a "grip" with their mouths to open the gate.
This latch is for 1 1/2" rails and comes with 2 1/2" catch. White is optional - call for details.

Residential Latches

Commercial Embassy Latch

Gravity Latches

Economy Latches

Dual Lockable Latches

Double Drive Gate Bar Latches

Slide Bolt Latches

Gate Latch for Walk and Double Gates

Charleston Latches

Safety Horse Latches

Yutka Latch