Products tagged with 'stainless steel'

Often imitated, this latch is a favorite! Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" for secure latching of heavy gates.
All components are stainless steel. Fits on all posts and gate frames 2" and larger. Integral gate pull built into bracket gate side. This latch has a 1/2" bar and is lockable with a 5/16" padlock. 10/26

Often imitated, this latch is a favorite! Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" for secure latching of heavy gates.
All components are stainless steel. Fits on all posts and gate frames 2" and larger. Integral gate pull built into bracket gate side. This latch has a 3/8" bar and is lockable with a 5/16" padlock. 10/26

This latch is an old favorite. This all stainless steel latch works on virtually any gate, and has been an industry standard design for years. Non-handed, bar is mounted to gate, with catch mounted to post (set back from radius on vinyl). 10/26

MFT's new version of an old favorite incorporates gate brackets that wrap around and secure with screws from two sides. The older designs that were secured to the face of the gate and post with just two screws fell off easier. Non-handed, bar mounts to gate, with catch mounted to outside corner of post, for greater adjustment ability. 10/26

Often imitated, this latch is a favorite! Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits on all posts and gate frames 1 3/4" and larger. Can be locked with a 5/16" padlock. Integral gate pull built into bracket at gate side. 10/26

100% Stainless Steel. Designed for use with steel or iron gates. Gate side bracket adjusts 1/2"- 2 3/4", stainless steel T-Rod and nuts.
Furnished with 5/16" large Super Tek Screws for installation. Fits 2" post, 2" gate frame. Removable E-Clip, furnished with security screw.
Commonly used on drive gates and enclosures. Stainless steel version: For use on aluminum gates or harsh environments. Swings 180 degrees.

Versatile double drive gate latch adjusts 0-4" to match gate spacing. All components are stainless steel. This latch is also lockable with a 5/16" padlock, and works well with a drop rod. Fits gate frames 1" x 3 1/4" or larger. 10/26

Now made for 6" and larger posts! Similar to the Large Economy Latch, and can be locked from both sides (inside or outside) of the gate with a 5/16" padlock. Sometimes referred to as a “hatchet latch", it has a spring loaded “clicker" for secure latching of heavy gates. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 6" or larger. 10/26

Similar to the Large Economy Latch, can be locked from both sides (inside or outside) of the gate with a 5/16" padlock. Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 5" or larger. This latch has a 1/2" bar. 10/26

Similar to the Large Economy Latch, can be locked from both sides (inside or outside) of the gate with a 5/16" padlock. Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 5" or larger. This latch has a 1/2" bar. 10/26

Similar to the Large Economy Latch, can be locked from both sides (inside or outside) of the gate with a 5/16" padlock. Sometimes referred to as a "hatchet latch", it has a spring loaded "clicker" and positive latching design to prevent "bounce outs", for secure latching. Clicker is held on with screws fitted with NYLOK BLUE PATCH.
All components are stainless steel. Fits a gate frame of 2" or larger, and a post of 5" or larger. This latch has a 3/8" bar. 10/26

SPECIAL ORDER ONLY. PLEASE CALL TO ORDER!!! 100% Stainless Steel. Used with large scale steel and iron gates. Gate side bracket adjusts from 5/8" - 3", stainless steel T-Rod, nuts, self-lubricating bushing, Super Tek Screws for locating of hinges, and Carriage Bolts for through bolting to ensure secure installation. Removable E-Clip, furnished with security screw. Commonly used on large drive gates and enclosures, zoo fencing and high security settings. Swings 180 degrees.