Fasteners

5/16 x 1" Zinc Hex Washer Head Tek 3 screw - Black

ACS-5/16x1

American made. 5/16" X 1". Used on our Commercial Embassy Hinges.

5/16 x 1" Zinc Hex Washer Head Tek 3 screw - Plain

ACS-5/16x1P

American made. 5/16" X 1". Used on our Commercial Embassy Hinges.

#12 x 1" SS Phillips Pan Head Screws - Black

ACS-12-BL

Phillips Pan Head #12 X 1".

#12 x 1" SS Phillips Pan Head Screws - White

ACS-12-WH

Phillips Pan Head #12 X 1".

#12 x 1 1/2" SS Phillips Pan Head Screws - White

ACS-12WH-15

Phillips Pan Head #12 X 1 1/2".

#12 x 2" SS Phillips Pan Head Screws - White

ACS-12WH-2

Phillips Pan Head #12 x 2".

#12 x 1 1/4" Silver Hex Washer Head Tek Screw

I-12-24x1st

American made.

#14 x 1" SS Pan Head Screws -Black

ACS-14BL

American made. Black Phillips Pan Head (Xylan coated)

#14 x 1" SS Pan Head Screws - White

ACS-14WH

American made. White Phillips Pan Head (Xylan coated)

#14 x 1" Zinc Hex Washer Head Tek 3 Screws - Black

I-ZINC 14x1

American made. #14 X 1" Zince Hex Washer Head Tek 3 Screws. For use on ornamental iron.

3/16" Pop Rivets Plain

ACS-316P

3/16 inch pop rivets Tan or Almond. These pop rivets are excellent for use in vinyl fence. They are designed to explode into three legs inside of the material for maximum holding power. Only the head of the rivet is painted to prevent your tool from being gummed up or destroyed Beware of the many cheaper rivets with the paint on the nail.

3/16" Pop Rivets White

ACS-316W

3/16 inch pop rivets White. These pop rivets are excellent for use in vinyl fence. They are designed to explode into three legs inside of the material for maximum holding power. Only the head of the rivet is painted to prevent your tool from being gummed up or destroyed.

3/16" Pop Rivets Tan (Almond)

ACS-316T

3/16 inch pop rivets Tan or Almond. These pop rivets are excellent for use in vinyl fence. They are designed to explode into three legs inside of the material for maximum holding power. Only the head of the rivet is painted to prevent your tool from being gummed up or destroyed.

3/8" Diameter Clip for 7/8" & 1" Profile

VM-78-1PC

A hidden fastener used to attach pickets to rails for a clean look. Simply route or drill a 3/8" hole in the picket, and a matching hole in the rail, and snap this clip into the picket, then snap the picket to the rail. No glue, no screws, no rivets, no caps.

Rail Clip for Post and Rail

TC-CLIP

Used instead of notching for assembly and repair of rail to post connections. Angled points extend through holes at end of rail, with "U" shaped bend inserted into rail. Slide rail into routed hole in post. Angled points compress as the rail slides in, and once past the wall of the post, rebound to lock the rail in place.