Filter by:

Clear All

Hinges

At Modern Fence Technologies all of our Hinges are 100% American Made. Using American Made Stainless Steel or Mild Steel, our hinges our durable and made to last. By powder coating all of our hinges, either in black or white, also helps them to withstand the elements over time. All of our hinges are sold in sets of 2 so that you can hang a gate with them, and shipped with all hardware needed to hang them. Once you have used and installed a Modern Fence Hinge, you will never want to use anything else.

 

MFT hinges are not designed to work alone in swimming pool applications where gates are required to be self closing.  They are made to work in conjunction with a secondary added self closing device.  Due to the many environmental and installation variables we do not guarantee any of our products for pool applications.

View as Grid List
Sort by
Display per page

3 1/2" SS Gravity Residential Hinge with Springs

KSS-35X35GHS-WS
100% Stainless Steel. Designed for 3 1/2" and larger gate frames. Post can be any size 3 1/2" or larger.
Shipped with stainless steel screws. Hinges made with bearings and removable clevis pin. Swings 180 degrees.

3 1/2" MS Residential Hinge Wall Mount

KMS-4X35WFH
Designed for 3 1/2" and larger gate frames. Designed to be attached directly to the concrete or vinyl siding and walls. The post and gate brackets are Mild steel all the other parts are stainless steel.
Shipped with stainless steel screws. Hinges made with bearings and removable clevis pin.

3 1/2" SS Residential Hinge Wall Mount

KSS-4X35WFH
Designed for 3 1/2" and larger gate frames. Designed to be attached directly to the concrete or vinyl siding and walls. The post and gate brackets are Mild steel all the other parts are stainless steel.
Shipped with stainless steel screws. Hinges made with bearings and removable clevis pin.

4" MS Commercial Hinge

KMS-4X4HS
Designed for 4" and larger gate frames. Post can be any size 4" or larger. The post and gate brackets are mild steel all the other parts are stainless steel.
Shipped with stainless steel screws. Hinges made with bearings and removable clevis pin. Swings 180 degrees.

4" MS Commercial Hinge with Springs

KMS-4X4HS-WS
Designed for 4" and larger gate frames. Post can be any size 4" or larger. The post and gate brackets are mild steel all the other parts are stainless steel.
Shipped with stainless steel screws. Hinges made with bearings and removable clevis pin. Swings 180 degrees. Comes with two springs for each hinge, for self closing.

4" SS Commercial Hinge

KSS-4X4HS
100% Stainless Steel. Designed for 4" and larger gate frames. Post can be any size 4" or larger.
Shipped with stainless steel screws. Hinges made with bearings and removable clevis pin. Swings 180 degrees.

4" SS Commercial Hinge with Springs

KSS-4X4HS-WS
100% Stainless Steel. Designed for 4" and larger gate frames. Post can be any size 4" or larger.
Shipped with stainless steel screws. Hinges made with bearings and removable clevis pin. Swings 180 degrees. Comes with two springs for each hinge for self-closing.

4" MS Commercial Hinge Wall Mount

KMS-4X4WFH
Made of stainless steel with mild steel brackets. Designed to be attached directly to wall or pillar on post side. Can be used for 180 degrees applications.
Note: Space between wall and gate must be equal to the width of rail to allow gate to swing both ways. These particular hinges are designed for gates up to 72" wide and 84" high.