Miscellaneous

Mark hole locations in a color that won't be confused with underground utility markings. Silver color is also great for touching up burnt galvanizing after welding gates. This 12 oz. Aluminum Post Hole Paint is fast drying, long lasting, lower flammability, and the color is OSHA approved. 6/24

Galv-Match-Plus™ is our one-step process that protects welds and damaged galvanizing while providing a coating that match’s the look of new galvanizing. With the Galv-Match-Plus™ process we’ve combined the latest technology’s utilizing highly milled and filtered zinc dust, the latest one part epoxy resins, and high-grade aluminum flake that matches the look of new galvanizing. Galv-Match-Plus™ has been designed to assist Galvanizers and fabricators with the protection of weld joints or damaged galvanizing from welding, cutting, or drilling. Easy to apply with a fast-drying time to handle or reapply of only 15 minutes, you’ll be assured fabrication wouldn’t be slowed down. Our final result is a one-step process that Lasts longer, looks great and dries fast for less down time. Balanced One-Step formula GMP-100 combines the proper corrosion-inhibitive properties of metallic zinc (65%-70%) in the dry film and a corresponding high percentage of epoxy esters to assure that zinc protection stays in place. As a result, Galv-Match-Plus™ is used as a one-step process for the repair of damaged hot-dip galvanized steel or cold galvanizing without the need for a primer or topcoat. Galv-Match-Plus™ provides a non-toxic metallic finish matching the look of hot-dip galvanizing and possesses outstanding salt spray resistance conforming to the performance requirements for all specifications. See technical section for more details. Galv Pro 1 Step Cold Galvanizing Spray 12.5 oz 6/24

Introducing our newest addition Galv-Pen-Plus™ a unique and convenient way to make fast and easy touch-ups. With our special spring released applicator tip there will never be a mess. Paint Pens are unique application tools that are ideal for the touch up of scratches and small nicks that require pinpoint accuracy. They’re easy to use and can be applied as a thick or thin line depending upon the rotation of the applicator tip. Our pens contain the same time proven cold galvanizing material as our Galv-Match-Plus™. With 70% zinc in the dry film these pens will match the shiny appearance of hot dip galvanizing and our Galv-Match-Plus™. Meets the ASTM-A780 for superior corrosion protection. Galv-Pen-Plus™ contains .3 fluid ounces. 6/24

3" Long Rollers. Mild steel Bracket with white powder coating 3" UHMW Roller on 5/8" stainless steel bolt and nut. 6/24

6" Long Rollers. Mild steel with white powder coating 3" UHMW Roller on 5/8" stainless steel bolt and nut. 6/24

Modern Fence Double Roller Gate Saver is perfect for any gate, will fit 2" or smaller. Our Gate Saver is made to roll over small objects and makes your hinges last. Adjustable with 2 springs. 8 per case!

High quality rollers milled from tough, engineered material. Hole is concentric to bearing surface to prevent "loping," or bouncing of gate caused by out-of-round rollers. One box includes 1 top and 1 bottom 2 3/8" x 4" cantilever rollers, w/guards and mounting hardware. Typical cantilever gate requires 2 sets for mounting.

High quality rollers milled from tough, engineered material. Hole is concentric to bearing surface to prevent "loping," or bouncing of gate caused by out-of-round rollers. One box includes 1 top and 1 bottom 2 3/8" x 65/8" cantilever rollers, w/guards and mounting hardware. Typical cantilever gate requires 2 sets for mounting.

Six wheel gate trolley replacement assembly. Designed to keep wheel faces flat and square on track. Prevents "cutting" with edge of wheel. 6/24

6/24

This product is attached under a screw hole on the hinge. attaching a cable and then running it to the other bracket or the bottom of the gate. When using gate bracing proper use is to keep it under 45 degrees. When bracing under 45 degrees it prevents twisting the gate and is much more effective on lifting. For more information call your CSR here at MFT. 6/24

A shaft that has a hookscrew and an eye-hole screw on either end that is able to be tightened or loosened after it has been attached to the cable and inserted into the lower turnbuckle holder. This zinc-coated and galvanized turnbuckle is used for gate bracing.

Small stainless steel L bracket used for connecting cable end to fence or gate. Not painted. 10/24

This product is "L" shaped so it can be attached to the side and bottom of the lower part if a gate by screw or bolt and has 2 small holes where the turnbuckle can be inserted.

Forms an "eye" in any cable 1/16" to 3/16". Use a 7/16" wrench to tighten. All stainless steel construction. Replaces traditional swedge and sleeve "crimps." One size clamp for three sizes of cable and no special tools required. Stainless Steel Cable Clamp was designed to hold necessary safety cable/wire on automatic gates to keep hands from entering & injury! 6/24

Stainless Steel Wire Clamp. Comes with 2 screws. 6/24

End piece that is crimped onto either end of the cable to prevent and keep the cable tension tight. Used for gate bracing. 6/24

End piece that is crimped onto either end of the cable to prevent and keep the cable tension tight. Used for gate bracing. 6/24