Tools

Modern Fence Technologies offers a variety of tools that are needed in the fence industry. From Bear Claws to Router Bits, we have you covered to be able to complete you fence jobs.

View as Grid List
Sort by

Rail Remover

KNR-TRR-1555
1 1/2 x 5 1/2 rail remover for removal of vinyl fence rails. Insert the blades on both sides of the rail to unlock the snap-lock tabs. Makes repairs or replacement of rails faster, easier, and safer!

Rail Remover

KNR-TRR-235
2 x 3 1/2 rail remover for removal of vinyl fence rails. Insert the blades on both sides of the rail to unlock the snap-lock tabs. Makes repairs or replacement of rails faster, easier, and safer!

Apple Jack

KNR-AJ
Used for setting wire to correct height before tying fence off. Use as a third hand and save manpower. 6/24

Pumpkin Claw

KNR-PC
Use to safely hang fencing during installation. Works properly when used every 20 to 30 feet to secure before tying fence off 6/24

Banana Clip

KNR-BC
Ease your fencing installation! Designed to slide on top rail as you tension the fabric. Use Banana Clips to hang fence on outside of top rail. Great for stretching fabric. Holds fence up before tying off. Used every 20 to 30 feet for safe use. 1/24

Banana Clip (Plastic)

VM-BC
Ease your fencing installation! Designed to slide on top rail as you tension the fabric. Use Banana Clips to hang fence on outside of top rail. Great for stretching fabric. Holds fence up before tying off. Used every 10 to 20 feet for safe use. Labor saver. 5/24

Chain Link Knuckle Twist Tool

KNR-PRKT
Use instead of pliers for easy to control knuckling after weaving or offsetting chain link fabric. Also, useful when stretching barbed wire. 5/24

1 3/8" Bear Hold Chain Link Stretchers

138-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

1 5/8" Bear Hold Chain Link Fence Stretchers

158-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

1 7/8" Bear Hold Chain Link Fence Stretchers

178-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

2 3/8" Bear Hold Chain Link Fence Stretchers

238-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

2 7/8" Bear Hold Chain Link Fence Stretchers

278-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

3 1/2" Bear Hold Chain Link Fence Stretchers

350-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

4" Bear Hold Chain Link Fence Stretchers

4-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

4 1/2" Bear Hold Chain Link Fence Stretchers

450-BEAR
Stretch and hold a fence into position with just one person. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. Bear Hold Stretchers are guaranteed for life. 5/24

6 5/8" Bear Hold Chain Link Fence Stretchers

658-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 6/24

8 5/8" Bear Hold Chain Link Fence Stretchers

858-BEAR
Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The following sizes 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4" each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. Bear Hold Stretchers are guaranteed for life. 5/24

5 Piece Set Bear Hold Chain Link Fence Stretchers

5SET-BEAR
Set comes with 5 Bear Hold Stretchers - 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4". Stretch and hold a fence into position with just one person. Hook the tool onto the tension bar, wrap the tool around the post, lever action will stretch fence. Final action will lock down tool to hold fence in position while tension bands are secured. One Bear Hold Fence Stretcher will work fine on a fence 4 feet or less, use two stretchers for fences up to 8 feet. The five Bear Hold Stretchers in the set ( 1 5/8", 1 7/8", 2 3/8", 2 7/8" and 4". ) each have a bend at the end of the handle. In the bend is a hex cut which is the right size to tighten the most common size nuts on chain link fence fittings. 5/24