Vinyl Tools

Compound leverage handle action and 3/8"(9.53mm) throat depth. Makes 1/4"(6.35mm) snap-lock tab in vinyl material up to 0.075"(1.905mm) thickness.

Compound leverage handle action and 7/8"(22.23mm) throat depth. Makes 1/4"(6.35mm) snap-lock tab in vinyl material up to 0.075"(1.905mm) thickness.

Compound leverage handle action and 7/8"(22.23mm) throat depth. Makes 1/2"(12.7mm) snap-lock tab in vinyl material up to 0.090"(3.429mm) thickness.

Notcher cuts 3/4" wide tab in rail used to lock into post. Light in weight 19" aluminum handles and high quality, replaceable cutting heads easily cut through heavy gauge. 135" rails. Lockable handle design provides double mechanical advantage.

Powerful 3-piston pneumatic cylinder with palm touch actuator and precision milled notcher heads. Notches snap-lock tabs in vinyl fence rail and pickets. Notcher heads are interchangeable on all 1/4-Inch and 1/2-Inch models. Replaceable jaws are available for all models. (Air hose fittings not included.) Makes 1/4"(6.35mm) snap-lock tab in up to 0.075"(1.905mm) vinyl. 3/8"(9.53mm) throat depth.

3-piston pneumatic cylinder with palm touch actuator and precision milled notcher heads. Notches snap-lock tabs in vinyl fence rail and pickets. Notcher heads are interchangeable on all 1/4-Inch and 1/2-Inch models. Replaceable jaws are available for all models. (Air hose fittings not included.) Makes 1/4"(6.35mm) snap-lock tab in up to 0.075"(1.905mm) vinyl. 7/8"(22.23mm) throat depth.

Powerful 3-piston pneumatic cylinder with palm touch actuator and precision milled notcher heads. Notches snap-lock tabs in vinyl fence rail and pickets. Notcher heads are interchangeable on all 1/4-Inch and 1/2-Inch models. Replaceable jaws are available for all models. (Air hose fittings not included.) Makes 1/2"(12.7mm) snap-lock tab in up to 0.090"(2.286mm) vinyl. 7/8"(22.23mm) throat depth.

Powerful 3-piston pneumatic cylinder with palm touch actuator and precision milled notcher heads. Notches snap-lock tabs in vinyl fence rail and pickets. Notcher heads are interchangeable on all 1/4-Inch and 1/2-Inch models. Replaceable jaws are available for all models. (Air hose fittings not included.) MW-1412VFNPI comes with MW-14VFNPI complete unit and an additional interchangeable 1/2" notcher head (See specs below). 1/4" head makes 1/4"(6.35mm) snap-lock tab in up to 0.075"(1.905mm) vinyl. 3/8"(9.53mm) throat depth. 1/2" head makes 1/2"(12.7mm) snap-lock tab in up to 0.090"(2.286mm) vinyl. 7/8"(22.23mm) throat depth.

Use to elongate hole in aluminum fence posts and rails for racking fence section when required by grade. Cuts square corners through 0.080"(2.032mm) aluminum wall thickness. Use multiple strokes for wider or deeper cuts. Cutting Width Per Stroke: 0.650"(16.51mm). Cutting Depth Per Stroke: 0.125"(3.175mm).

Use to elongate picket hole in rail when required to rack picket fence over a slope or grade. Variable leverage handle action. Long aluminum handles. Replaceable cutter jaws. Clean cutting action. Self-aligning to existing picket rail hole opening. (Note: Move tool side-to-side for picket rail hole opening wider than nibbler.) Nibbles away 1/8"(3.175mm) of material per stroke and 7/8"(22.23mm) cutting width per stroke.

Use to elongate rail hole in post when required to rack fence rails or section over a slope or grade. Variable leverage handle action. Long aluminum handles. Replaceable cutter jaws. Clean cutting action. Self-aligning to existing post rail hole opening. (Note: Move tool side-to-side for post rail hole openings wider than nibbler.) Nibbles away 1/4"(6.35mm) depth of material per stroke and 1-1/2"(38.1mm) cutting width per stroke.

Use to elongate rail hole in post when required to rack fence rails or section over a slope or grade. Variable leverage handle action. Long aluminum handles. Replaceable cutter jaws. Clean cutting action. Self-aligning to existing post rail hole opening. (Note: Move tool side-to-side for post rail hole openings wider than nibbler.) Nibbles away 1/4"(6.35mm) depth of material per stroke and 2"(50.8mm) cutting width per stroke.